3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.
3D Printing Motor product introduction:
The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.
Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;
Simplify design and save space.
Features: usually used financial equipment,
office equipment, electronic locks, wireless charger, remote control toys, precision
instruments and meters, automobile industry, medical equipment, consumer
electronics, household appliances, electric glass doors and Windows, etc., wide
application range
Method
of use: the best stable in horizontal plane, installed on the 3D Printing Motor output
shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the
case of blocked.
Operating temperature range:
3D Printing Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
3D Printing Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a
major player as well .each month,we rurn out
600000 units,all of which are compliant with the rohs directive.Have any
questions or special needed, please contact us, we have the engineer group and
best sales department to service to you Looking forward to your inquiry. Welcome to
our factory.
3D Printing Motor 3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
Long Tianyuan is engaged in CD-ROM production. In 2010, he began to research and develop high-power LED lighting products with a mass production of more than 200 watts. Up to now, LED high-bay lights and 500-watt LED floodlights with a power of more than 200 watts have been developed. This 200-watt LED high-bay lamp, which can be used in high-precision precision working environments, has successfully replaced mercury lamps with a power consumption greater than 500 watts. In addition, the 500-watt LED floodlight has become the only LED lighting product in the world that can replace the 1500-watt metal halide lamp. The total luminous volume can exceed 30,000 lumens, and it has been installed on the high pole of the container terminal height of 45 meters. These two products have been sold for one year and successfully entered the markets of Australia, Germany and Switzerland.
Before, Langtian exhibited for the first time the high-performance solar LED street lamp named "Taiwan Butterfly LED Lighting" series, which is different from traditional solar LED lighting. Its unique extremely low power consumption control system enables the lamps to directly use the battery DC power supply. A general PWM (pulse width modulation) AC/DC voltage conversion circuit is required, and the battery can be prevented from being overcharged and overdischarged. This product will be available in the US patent publication. 
Taiwan's Longtian transformation LED lighting results are expected to reach 50 million Taiwan dollars at the end of the year
The transformation of the production of niche-type LED lighting has achieved initial success with Taiwanese Guanglei and Guangtian Technology. On May 2, Langtian said that in early 2012, the products began to ship, and the first quarter revenue reached NT$5 million. It is expected to grow to NT$50 million at the end of the year, reaching a two-year profit and loss.