iPhone 6s sales are less than expected? Passing Foxconn in advance

Although the remarks of singing the iPhone have appeared every year, the news of the Foxconn factory’s early vacation is the first time we have seen it. Some netizens broke the news on Weibo, because Apple's sales of iPhone 6s fell short of expectations, Apple has lowered Foxconn's production orders, so at least the Foxconn factory in Zhengzhou, Henan Province will take annual leave. Prior to this, the Foxconn factory was working overtime during the Chinese New Year to catch up with the new iPhone.

iPhone 6s sales are less than expected? Passing Foxconn in advance

In the past few months, we have also seen a lot of reports about the iPhone 6s market reaction is not as expected. There are even analysts who believe that 2016 will be the first year of decline in sales since the birth of the iPhone.

In fact, many market research organizations expressed pessimism about the 2016 iPhone sales volume before the release of the iPhone 6s. Because in both developed countries and emerging regions such as China, the market for high-end iPhones is close to saturation. Since the iPhone 6 is the first Apple smartphone with a screen larger than 4 inches, it and its brother iPhone 6 Plus have also created the best sales results in history. Analysts believe that the iPhone 6/6 Plus is already the pinnacle of Apple.

Moreover, the iPhone 6s is basically the same as the iPhone 6 in appearance, and this feature is also difficult to stimulate the desire of more consumers to buy, because many people want to see a new and different shape design.

Prior to this, Apple suppliers also hinted that iPhone sales have entered a downward trend. For example, earlier this month, Jabil Circuit said in its quarterly forecast that its Diversified Manufacturing Services (DMS) division is forecast to see a 23% decline in revenue for the quarter. The main task is to make a shell for the iPhone. Is the analyst's prediction really correct once, iPhone growth has come to an end?

This reminds us of the news of the 4-inch high-end iPhone. If the iPhone product line sales are really not as good as expected, then the possibility of such a new phone appearing in the off-season is even greater.

The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.

High Mast Light Poleled street light

Material characteristics

1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.

2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.

3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.

4. The lamp frame is made of high quality stainless steel.

5.  Fasteners bolts and nuts are stainless steel.

6. Light source:400W-1000W sodium lamp. 

Specifications:

 

Height: from 18m to 50 m

Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.

Shape: round, multi-pyramidal, column form, polygonal or conical

Material:
    
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2

Tolerance of  Dimension: ±2%

Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²

Light plate: Various figure of selection ,material with hot dip galvanization steel frame

Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut

Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode

Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.

Joint of Poles: Insert mode, inner flange mode, face to face joint mode .

Design of pole: Against earthquake of 8 grade

Wind Speed: 80 Km/Hour

Welding: We has past flaw testing. Internal and external double welding makes the welding in shape

Thickness: 6 mm to 20 mm

Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging

Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required    


 




High-Mast Lamps Series

High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole

Jiangsu chengxu Electric Group Co., Ltd , https://www.satislighting.com